The frequency detector DSC3000PLUS can monitor and identify all wireless videotaping equipment (indoors or inside a car) quickly and efficiently. The DSC3000PLUS detects everything no matter how those videotaping equipment try to camouflage itself as anything (clothes, buttons, bags, mugs, books, etc.), even if the device is hidden on the couch, on the ceiling and on the cement DSC3000PLUS would pinpoint its spot accurately.
DSC3000PLUS can switch cell phone signal test mode to search the signal only through the multifunction key. Another test mode is the broadband model which can test 0-10GMHz wireless signals; 10-3000MHz wireless signal can search record-frequency mode. It can measure the frequency of any digital, switches and analog signals, such as mobile phone, wireless remote control, digital radio, car key, intercom, 1.2G/2.4G wireless camera, wireless microphone, WIFI, WIMAX and so on. The DSC3000PLUS is easy to operate and comes with a quality LCD screen display.
DSC3000PLUS has a built-in lithium battery. The intelligent charging system makes the battery perform at its best. Design consists of an aircraft-grade aluminum casing ensuring top performance and durability of the equipment. Machine and accessories are integrated into military-grade carrying cases which not only protect the equipment but makes it portable and easy to carry.
Technical Specification Record-frequency Mode Specification: |
Resolution: | 10 KHz (digital signal) 1 KHz (analog signal) |
Impedance: | 50 Ohms (MCX connector) |
Frequency range: | 10 MHz - 3 GHz |
Sensitivity: | -35 dBm Maximum Input: 15 dBm |
Cellphone signal Mode Specification: |
Impedance: | 50 Ohms (MCX connector) |
Frequency range: | U.S. BANDS LTE 700 CDMA 800 GSM1900 CDMA2000 LTE2300 WIFI 2400 EURASIAN BANDS LTE 800 GSM900 GSM1800 WCDMA2000 LTE2600 WIFI 2400 |
Sensitivity: | -60 dBm Maximum Input: 15 dBm |
Broadband Wireless Signal Mode Specification: |
Detection Frequency: | 0-10GHz |
Detection sensitivity: | -65dBm |
Sound: | Audible alarm and mute function |
Operation: |
SQL Knob: | - Adjusting the received signal strength
|
Multi-functional navigation key: | - Press the button for 2 seconds to change the working mode, the test frequency range can be changed by up or down button in frequency meter mode multifunction key: 500MHz bandwidth can measure the range of 10 MHz to 0.5 GHz; 3000 MHz bandwidth can measure the range of 500 MHz to 3 GHz; Right or left button can change the vibration, sound and light and mute warning display; clicking multifunction key to keep count. Cell phone signal test mode function keys can change the sensitivity (high, medium and low) by up or down button. Right or left button can change the vibration, sound and light and mute warning display. Wideband wireless signal test multi-function up or down button can change the sensitivity, there is 20 level can be selected, press the left and right direction can change the vibration, sound and light and mute warning display.
|
Standard Configuration: | Device Host, Battery, 3 Antenna, 3 Interchangeable plugs, charging adapter. |
Features | - 8 bit LCD display
- Multi-functional navigation key operation and the function mode is optional
- This machine can measure the frequency of any digital and analog signal
- 20 extrasensory synchronous RF signal strength indicator , sound and light vibrate silent alarm is optional
- Squelch adjustment
- 2 hour Low-power lithium battery
- High, medium and low battery LCD display
- LED charge status indicator
- Configured with full-band antenna and charging adapter
|
Precautions:
1. Battery: The digital frequency meter DSC3000PLUS uses a rechargeable lithium-ion battery, can be used in case the battery is full for three hours; for charging please use the supplied charger, charging time takes about 4 hours. In order to maintain battery life, the battery have to be finished before charge again.
Full, which can prevent the memory effect to prolong battery life. For the convenience of using the recommended backup battery replacement.
2. Signal input: In order to prevent damage to the machine, the signal input cannot be higher than the maximum frequency. When the frequency count installed the antenna, there may be some unknown frequency because the machine would get some of the weaker signals due to the large signal gain, once the signal reaches the normal standard of signal strength and frequency then it will have a stable display.
3. Antenna selection: Short antenna (mobile testing) and long antennas (broadband and frequency counter).
4. Test distance: Because there is a variety of RF signal from all around, results will vary in the meter reading and the frequency value is not determined. Some factors that has an impact on this includes: transmit power, signal strength, antenna matching, barrier or a different location under test may be affected.
Quality Assurance:
Our company provides product warranty within three years from the date of purchase. Under normal use during the warranty period, if the equipment fails, we will provide free warranty. But this warranty does not include modified, non- approved replacement, damage caused by strong signal input that exceed the specification, failure caused by misuse, abuse or external damage. The company will charge a fee for replacement not covered by the warranty.
- This warranty does not include anything other than the machine itself
- This warranty does not include the cost generated by transport
- The Company does not provide warranty service beyond the scope covered by the warranty
- The Company reserves the right to modify the specification
Application:
It can be used in sensitive meeting rooms to check for hidden GSM bugs and 3G wireless cameras, unauthorized mobile phone usage in offices, hospitals or prisons and in vehicles to locate hidden tracking devices or videotaping equipment.
